I-Corrosion Resistant Alloy Series
0102030405
UHLELO LWEKHEMICAL
ISITHUBA | % | Kwi | Nge | Fe | C | Mnu | Kwaye | S | Al | Kwe |
I-ALLOY 500 | MIN | 63 | 27 | _ | _ | _ | _ | _ | 2.3 | 0.35 |
MAX | _ | 33 | 2 | 0.18 | 1.5 | 0.5 | 0.01 | 3.15 | 0.85 |
Iipropati Zomzimba
ukuxinana | Indawo yokunyibilika | I-alloy state | tensile strength | unikeze Amandla | Elongation | Ukuqina |
8.8g/cm³ | 1315-1348℃ | isisombululo + ukuguga | Rm N/mm2 | Rp0.2 N/mm2 | A5% | HRC |
≥965 | ≥690 | 20% | ≥27 |
UMGANGATHO WESIGQEBA
Imveliso | Umgangatho we-ASTM | Umgangatho we-ASME |
Ibha, Ikhekhe | B865 | SB865 |
ukwenza | B564 | SB564 |
IMALI yemveliso
Monel K500 ingxubevange ukongeza amandla aphezulu, ukuxhathisa umhlwa, non-magnetic kunye nezinye iimpawu egqwesileyo mechanical, kunye Monel 400 ukuxhathisa umhlwa efanayo, ingasetyenziswa njengento impompo shaft, esebenzayo kwi-alloy akanalo iqondo lobushushu iplastiki-brittle utshintsho, ngoko ke ifaneleke kakhulu ezahlukeneyo izixhobo zobushushu obuphantsi. Ukubunjwa kweekhemikhali ze-alloy ngokuqhelekileyo kufana neMonel 400, umahluko omkhulu ngumxholo we-2.3-3.15% Al kunye ne-0.3-1.0% Ti. Intlangano yale alloy iyafana naleyo ye-Monel 400 ngaphandle kokuba kukho i-diffuse N3 (Al.Ti) ye-precipitation phase precipitation.
Isicelo semveliso
Le alloy isetyenziselwa kakhulu i-pump shafts, i-valve stems, i-conveyor scrapers, i-oil well drilling rings, i-elastic parts, i-valve gaskets, njl njl. Ifanelekile kwi-petroleum, ikhemikhali, i-shipbuilding, icandelo lamachiza kunye ne-elektroniki.
1. Imibhobho yamanzi engenamthungo kunye nemibhobho yomphunga kwizixhobo zombane.
2. Umtshintshi wamanzi olwandle kunye ne-evaporator
3. Imekobume ye-sulfuric kunye ne-hydrochloric acid
4.Ukuchithwa kweoli ekrwada
5. I-pump shafts kunye neepropeller zezixhobo ezisetyenziswa kumanzi anzulu olwandle
6. Izixhobo ezisetyenziswa kwishishini lenyukliya ekwenzeni ukucokisa iuranium kunye nokwahlula i-isotope.
7. Iimpompo kunye neevalvu ezisetyenziswa kwisixhobo sokwenziwa kwemveliso ye-hydrochloric acid
