Superalloy Series
0102030405
HADIN KASHIN KIMIYYA
SARKI | % | C | Cr | A ciki | Co | Domin | Al | Na | B | Zr | Fe | Mn | Kuma | P | S | A | Tare da | Da a | Pb |
GH105 | MIN | 0.12 | 14.0 | daidaitawa | 18.0 | 4.5 | 4.5 | 1.18 | 0.0030 | 0.07 | - | - | - | - | - | - | - | - | - |
MAX | 0.17 | 15.7 | daidaitawa | 22.0 | 5.5 | 4.9 | 1.50 | 0.010 | 0.15 | 1.0 | 0.4 | 0.25 | 0.015 | 0.010 | 0.0005 | 0.2 | 0.0001 | 0.0010 |
Abubuwan Jiki
yawa | wurin narkewa |
7.97g/cm 3 | 1340-1380 ℃ |
SIFFOFIN samfur
GH105 ne a Ni-Co-Cr tushen ajiya hardening nakasawa high zafin jiki gami da aiki zafin jiki na 750 ℃-950 ℃. Yanayin zafin jiki na alloy da ƙarfin zafin jiki yana da girma, aikin juriya na iskar shaka yana da fice, amma aikin sarrafa zafi da aikin walda na gabaɗaya ne. Ana iya amfani da shi don kera injin injin turbine, kusoshi masu zafi da sauran sassa masu zafi. Babban samfuran sun haɗa da sanduna masu birgima masu zafi da filaye, sanduna masu sanyi, bayanan martaba da zobe.
Aikace-aikacen samfur
An yi amfani da alluran wajen kera injunan injin turbine, madaidaicin fanko da ƙusoshin zafi da sauran sassa, tare da samar da tsari mai kyau da amfani. Juriya na lalacewa na gami yana da girma, kuma ya kamata a hana shi daga fashe yayin ƙirƙira da jujjuyawar, kuma sandar da aka zana sanyi ta dace da zafin zane na kusan 600 ° C. Haka kuma ana amfani da wannan gawa wajen kera injina na injin turbine, da hatimin fanka da kuma yawan zafin jiki.
