Corrosion Resistant Alloy Series
0102030405
CHEMICAL COMPOSITION
ERAUM |
% |
Ni |
Cr |
Mo |
Fe |
W |
C |
Si |
Co |
Mn |
P |
S |
Ti |
Cu |
Nb+Ta |
Al |
N |
B |
ALLOY N08120 |
MIN |
35.0 |
23.0 |
- |
balance |
- |
0.02 |
- |
- |
- |
- |
- |
- |
- |
0.4 |
- |
0.15 |
- |
MAX |
39.0 |
27.0 |
2.5 |
balance |
2.5 |
0.10 |
1 |
3 |
1.5 |
0.04 |
0.03 |
0.2 |
0.5 |
0.9 |
0.4 |
0.30 |
0.01 |
Physical Properties
density |
melting point |
8.07g/cm³ |
1364-1424℃ |
EXECUTIVE STANDARD
Product |
ASTM STANDARD |
Welded Pipe&tube |
B514 |
Bar |
B408 |
Plate, Sheet |
B625 |
Forging |
B564 |
Seamless Pipe&tube |
B163/B407 |
Product FEATURE
It has good resistance to corrosion by reducing, oxidizing and nitrogenating media as well as resistance to corrosion by redox alternating media, and has high metallurgical stability in high temperature and long-term application. As the content of (Al + Ti) is not higher than 0.7%, it has good tensile strength above 600℃, and still has good toughness when working for a long time below 700℃.
Product application
Used where high strength and good resistance to carburizing and vulcanizing environments are required. Heat Treatment baskets, radiant tubes, wire mesh belts and basket liners, muffle furnaces, retorts, reheaters, heat Treatment units and waste incinerators.
